Marantz PM8005 - Settings; Setting the Auto Standby Mode; Turning Auto Standby Mode off; Turning Auto Standby Mode on

30
Appendix
TipsPlaybackConnections
Contents
Front panel Rear panel IndexRemote
Settings
You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input.
Auto Standby mode is set to on by default.
SOURCE
DIRECT
Power indicator
Turning Auto Standby mode o
1
Press and hold SOURCE DIRECT for more than 5 seconds
to turn the Auto Standby mode o.
The power indicator flashes once.
Turning Auto Standby mode on
1
Press and hold SOURCE DIRECT for more than 5 seconds
to turn the Auto Standby mode on.
The power indicator flashes three times.
Setting the Auto Standby mode