Marantz PMD620 - Save Settings; Card Format

49
Save Settings
Save Settings saves all of the preset values onto the SD card. To
set the saved files onto the PMD620, perform Load Settings.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select “Utility”.
Then press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select “Save Settings”.
4.
Press the 3/8/ENTER button. “Save?” message is displayed.
• Press the STOP/CANCEL button to cancel saving item and
return to Stop mode.
5.
While “Save?” message is displayed, select “Yes” and press
3/8/ENTER button to output preset value in text format into
the file in a route folder on card. The title of the file output
is “620preset.txt”. During preset output, “Executing...” is
displayed. After the file output is completed, “Completed” is
displayed for one second and returns to Stop mode.
Card Format
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select “Utility”.
Then press the 3/8/ENTER button.
3.
Press the VOL+ or VOL– button to select “Card Format”. Then
press the 3/8/ENTER button.
• “Card Format?” message is displayed.
• Press the STOP/CANCEL button to cancel a Card Format
item and return to STOP.
4.
While “Card Format?” message is displayed, select “Yes”
and press the 3/8/ENTER button to format the SD card.
During formatting, “Executing...” is displayed. After displaying
“Completed” for a second, PMD620 return to Stop mode.