Marantz PMD620 - Rec Channel; Sample Rate

55
3. Rec Channel
The Rec Channel menu choice allows you to select the channel
of the audio file.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 3/8/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
3/8/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Rec Channel
item. Then press the 4 or ¢ button to tab through the Rec
Channel choices (Stereo or Mono).
6.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
4. Sample Rate
The Sample Rate menu choice allows you to select the sampling
rate 44.1kHz or 48kHz.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 3/8/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
3/8/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Sample Rate
item. Then press the 4 or ¢ button to tab through the
Sample Rate choices (44.1kHz or 48kHz).
6.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.