62
17. Auto Power Off
If the PMD620 is not operated for 15 minutes during Stop or Play-
Pause mode, the power can be automatically shut off to conserve
battery life.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 3/8/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
3/8/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the Auto Power Off
item. Then press the 4 or ¢ button to tab through the Auto
Power Off choices (On or Off).
6.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
18. SP Mute
When “SP Mute” is set to On, the sound being recorded is not
output from the speaker. When set to Off, the sound is output
from the speaker except when the sound is being recorded by
the built-in microphone.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 3/8/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
3/8/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the SP Mute item.
Then press the 4 or ¢ button to tab through the SP Mute
choices (On or Off).
6.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
To Next Page
Loading...
