When the results of check item (3-13.9.) are "60"
(Detection of HPD is not OK.)
Check item(3-13.13.). Checking the HPD :
Does the voltage of HPD test point close to the HDMI output terminal
[N9012] indicate Hi (3-5V)?
N9102
HDMI OUT
[MONITOR2]
HPD
19pin
Check the HPD. (OUT2)
HDMI Tx [U9101] is faulty.
Replace with a new device.
Recheck from check item (3.4.).
If it does not work, replace the PCB.
Check for a short circuit in the HPD line.
If there is no problem, the HDMI Tx [U9101] is faulty.
Replace with a new device.
NOYES
140
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
