3-5. TUNER STEP mode (U only)
3-5.1. Actions
This is a special mode that enables the reception frequency STEP of the ANALOG TUNER to be changed.
3-5.2. Starting up
While holding down buttons "
ZONE SELECT
" and "
BACK
" simultaneously, press the power button to
turn on the power.
Select the "
5. TUNER FREQ
" using the "
CURSOR
f
/
d
" button, then press the "
ENTER
" button to
conrm.
3-5.3. Displays
Start up this unit in TUNER STEP mode, select the desired option using the "
CURSOR
0
/
1
" button,
then enter using the "
ENTER
" button.
確定します。
The following information is displayed in the following order.
(1) AM9 kHz / FM50 kHz is selected
L1
*TUNER FRQ Set
L2
< AM9/FM50 >
"
CURSOR
0
"
"
CURSOR
1
"
(2) AM10 kHz / FM200 kHz is selected
L2
< AM10/FM200 >
"
ENTER
"
(3) Press the power button to turn off the power.
(4) Press the power button to turn on the power.
158
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
