Why is there no Audio output from the surround back speakers on Marantz SR4500 Stereo Receiver?
If you're experiencing no audio output from the surround back speakers on your Marantz Stereo Receiver, check the following: * Ensure the surround back speaker cable is correctly connected. * Set surround mode to EX/ES. * Make sure that Surround back = NONE is not selected in SPEAKERS SIZE SETUP; correct the setting if needed.
Why is there no Audio output from the surround speakers on Marantz SR4500?
If you're not getting audio from the surround speakers on your Marantz Stereo Receiver, check these things: * Make sure the surround speaker cables are properly connected. * If STEREO is selected for Surround mode, choose another surround mode. * Ensure that Surround = NONE is not selected in SETUP mode; correct the setting if needed.
Why is there no Audio output from the center channel speaker on Marantz SR4500 Stereo Receiver?
If you're not getting audio from the center channel speaker on your Marantz Stereo Receiver, try the following: * Ensure the center speaker cable is correctly connected. * If 'STEREO' is selected for Surround mode, choose another Surround mode. * Check that 'Center = NONE' is not selected in SETUP mode; correct the setting if needed.
What to do if no output to Sub Woofer Out on Marantz Stereo Receiver?
If you're not getting any output from your subwoofer on your Marantz Stereo Receiver, check your settings. If 'Sub-woofer = NONE' has been selected in SETUP mode, change it to 'Sub-woofer = YES'.
What to do if no sound and picture are output even when power is on Marantz Stereo Receiver?
If you're not getting any sound or picture from your Marantz Stereo Receiver SR4500 even when it's powered on: * Ensure that mute is off by using the remote control. * Check the input cable connections using the connection diagram. * Adjust the master volume to an audible level. * Select the correct function selector position.
General| Frequency Response | 10Hz-100kHz (+1, -3 dB) |
|---|---|
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity | 200mV (line) |
| Tuning range | FM, AM |
| Damping Factor | 100 |
| Input Impedance | 47k ohms |
| Power Output | 90W per channel (8 ohms, 20Hz-20kHz, THD 0.08%) |
| Signal-to-Noise Ratio | 105dB (line) |
| Video Connections | Composite, S-Video |
| Digital inputs | Optical, Coaxial |
| Speaker Impedance | 6-8 ohms |
To Next Page
