6. CS II (CIRCLE SURROUND II)
1.
Select “6. CS II” in SETUP MENU with or
cursor button.
2.
Press the ENTER button to enter this menu.
3.
Press or cursor button to select desired
item.
4.
Press or cursor button to set the level.
5.
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP
MENU by pressing the ENTER button.
Or press the or cursor button to select
“EXIT” then press the ENTER button to exit
the SETUP MENU.
TRUBASS:
Set the TRUBASS level between 0 and 6 level in
1 level interval with or cursor button.
TRUBASS produced by the speakers to be an
octave below the actual physical capabilities of
the speakers adding exciting, deeper bass
effects.
SRS DIALOG:
Set the SRS DIALOG level between 0 and 6
level in 1 level interval with or cursor button.
This can be popped out of the surround audio
effects allowing the listener to easily discern
what the actors say.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
4. 5.
2. 5.
1. 3. 5.
MENU STRUCTURE of CS II setup
5. PL II (DOLBY PRO LOGIC II )
MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and
enveloping surround ambience from stereo
sources such as CDs.
In this
mode, SR4500 includes three controls to
fine-tune the soundfield as follows.
1.
Select “5.PLII MUSIC PARAMETER” in
SETUP MENU with or cursor button.
2.
Press the ENTER button to enter the menu.
3.
Press or cursor button to select a desired
item.
4.
Press or cursor button to select the mode
or set the level.
5.
When you select “TO MAIN MENU” by pressing
the or button, you can return the SETUP
MENU by pressing the ENTER button.
Or press the or cursor button to select
“EXIT” then press the ENTER button to exit
the SETUP MENU.
PANORAMA:
Select the Panorama mode On or Off with or
cursor button.
Panorama wraps the sound of the front left and right
speakers around you for an exciting perspective.
DIMENSION:
Set the Dimension level between 0 and 6 level in
1 level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain recordings.
C WIDTH:
Set the Center width level between 0 and 7 level
in 1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the
center is mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will
not appear.
To Next Page
Loading...
