Marantz SR5009/U1B - Page 50

3.7. TUNER STEP mode
3.3.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3.7.2. Starting up
Hold down buttons "ZONE2 SOURCE" and "STATUS" at the same time and press the power button to turn on the power.
Select the "5. TUNER FRQ SER" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit
the selection.
3.7.3. Displays
Start this unit in TUNER STEP mode, select using button "TUNER PRESET CH+/-" and enter using button "STATUS".
The following information is displayed in the following order.
(a) AM9kHz/FM50kHz selected
FLD
L1
T u n e r F R Q
L2
A M 9 /
L3
F M 5 0
"TUNER PRESET CH+" "TUNER PRESET CH-"
(b) AM10KHz/FM200kHz selected
FLD
L1
T u n e r F R Q
L2
A M 1 0 /
L3
F M 2 0 0
"STATUS"
(C) Press the power button to turn off the power.
(D) Press the power button to turn on the power.
50