What to do if noise is produced during DTS- encoded CD or laser disc play on Marantz SR8300 Stereo Receiver?
If you're getting noise during DTS-encoded CD or laser disc playback, ensure you're using a digital connection and have selected digital input. Avoid using analog input for DTS sources.
What to do if sound from the wrong channel is output from the speaker on Marantz SR8300 Stereo Receiver?
If sound from the wrong channel is coming from the speaker, the speaker cable may be connected incorrectly. Connect the cable correctly by referring to the connection diagram.
What to do if no sound and picture are output even when power is on in Marantz SR8300 Stereo Receiver?
If there's no sound and picture even when the power is on, here's what to check: Mute might be on, so cancel it using the remote. Ensure the input cables are correctly connected according to the connection diagram. Adjust the master volume, and make sure the function selector is in the correct position.
What to do if FM or AM reception fails on Marantz SR8300?
If FM or AM reception fails, the antenna connection may be incomplete. Correctly connect the indoor FM and AM antennas to the FM and AM antenna outlets.
What to do if surround mode cannot be changed on Marantz SR8300?
If you're unable to change the surround mode, it might be because headphones are connected to the jack. When headphones are connected, the Surround mode is fixed to STEREO, so disconnect the headphones.
What to do if noise is heard during AM reception on Marantz SR8300 Stereo Receiver?
If you're hearing noise during AM reception, it might be due to interference from other electrical fields. Try changing the location where the AM indoor antenna is set up to see if that reduces the noise.
What to do if noise is heard during FM reception on Marantz Stereo Receiver?
If you're experiencing noise during FM reception, it could be due to weak radio waves from the broadcasting station. Try installing an FM outdoor antenna or using cable TV/FM to improve the signal.
What to do if control with the remote control unit fails on Marantz Stereo Receiver?
If you're having trouble with the remote control, try these steps: First, replace all the batteries with new ones. Then, try controlling the equipment from a different position. Move closer to the SR8300, and make sure there's nothing blocking the path between the remote and the receiver.
Why is my Marantz Stereo Receiver not turning on?
If your SR8300 isn't turning on, the most likely cause is that the power plug isn't properly connected. Make sure to connect the power plug securely to the outlet.
What to do if speaker not outputting any sound on Marantz Stereo Receiver?
If your speakers aren't producing any sound, make sure that headphones are not connected to the headphone jack, as speakers will not output sound when headphones are connected. Disconnect the headphones.
Safety and operational guidelines for using the equipment.
Guidelines for proper placement and setup of the unit.
Safety measures to follow before connecting any cables.
Details on the amplifier's power, feedback, and sonic capabilities.
Information on surround sound formats, decoders, and digital audio.
Explains THX standards, DTS, DTS-ES, DTS 96/24, and SRS Circle Surround II.
Details Dolby Digital EX and Dolby Pro Logic II surround sound features.
Controls for screen navigation, input selection, and volume adjustment.
Programming RC3200A to learn codes from other remote controls.
Creating sequences of commands triggered by a single button.
Configuring input assignments and speaker sizes/distances.
Adjusting PLII music parameters, dimension, and CS II settings.
Solutions for no power, no sound, or incorrect channel output.
Troubleshooting noise, weak reception, and incorrect signal playback.
Safety and operational guidelines for using the equipment.
Guidelines for proper placement and setup of the unit.
Safety measures to follow before connecting any cables.
Details on the amplifier's power, feedback, and sonic capabilities.
Information on surround sound formats, decoders, and digital audio.
Explains THX standards, DTS, DTS-ES, DTS 96/24, and SRS Circle Surround II.
Details Dolby Digital EX and Dolby Pro Logic II surround sound features.
Controls for screen navigation, input selection, and volume adjustment.
Programming RC3200A to learn codes from other remote controls.
Creating sequences of commands triggered by a single button.
Configuring input assignments and speaker sizes/distances.
Adjusting PLII music parameters, dimension, and CS II settings.
Solutions for no power, no sound, or incorrect channel output.
Troubleshooting noise, weak reception, and incorrect signal playback.
General| Total Harmonic Distortion (THD) | 0.08% |
|---|---|
| Signal-to-Noise Ratio | 100 dB |
| Input Impedance | 47k ohms |
| Weight | 35.3 lbs |
| Type | AV Receiver |
| Channels | 7.1 |
| Input Sensitivity | 200 mV |
| Video Inputs | Composite, S-Video, Component |
| Surround Sound Formats | Dolby Pro Logic II |
To Next Page
