Need help?Do you have a question about the Mark OptiTherm Plus 06 29 189 and is the answer not in the manual?
General| Category | Thermostat |
|---|---|
| Power Supply | 230 V AC |
| Power Consumption | 2 VA |
| Temperature Range | 5 - 30 °C |
| Accuracy | 0.5 °C |
Manufacturer's right to modify specifications without prior notice.
Essential safety and installation guidelines to follow.
Description of the thermostat's capabilities and intended uses.
Detailed specifications including item number, dimensions, and power.
Default temperature, clock, and mode settings from the manufacturer.
General guidelines for installation and initial checks.
Recommendations for optimal placement of the thermostat.
Information and requirements for connecting the thermostat via bus cable.
Step-by-step instructions for physically installing the thermostat unit.
Procedure for the first power-up and initial configuration.
Description of the function of each button on the thermostat interface.
Guide to understanding the icons and information shown on the thermostat display.
Details on the automatic function to prevent freezing temperatures.
How to manually activate or deactivate the heating function.
Instructions for controlling the ventilation feature of the air heater.
Using the timer to temporarily override programmed settings.
Accessing the primary user-configurable menu.
Adjusting the desired temperatures for different operating modes.
Programming or modifying the daily heating schedule.
Setting specific dates for alternative operating modes.
Accessing advanced settings like date, time, and language.
Updating the thermostat's internal clock and calendar.
Customizing the duration and mode for overtime operation.
Choosing the source for room temperature measurement.
Adjusting temperature readings for accuracy.
Configuring the fan operation for energy-saving mode.
Enabling and configuring the intelligent heating optimization feature.
Selecting the display language for the thermostat.
Managing automatic daylight saving time adjustments.
Viewing system information, such as software version.
Setting or changing the security PIN for menu access.
Accessing advanced factory-level configurations (restricted).
Accessing installer-specific settings and configurations.
Restoring the thermostat to its original default settings.
Understanding general messages displayed on the thermostat.
Interpreting error codes and troubleshooting device issues.
To Next Page
