Need help?Do you have a question about the Mark optitherm 06 29 191 and is the answer not in the manual?
General| Category | Thermostat |
|---|---|
| Model | Mark optitherm 06 29 191 |
| Display | LCD |
| Control Type | Electronic |
| Mounting | Wall Mount |
Manufacturer reserves the right to make specification changes without prior notice.
Installation must comply with local/national regulations by a qualified electrician.
Digital clock thermostat for controlling air heaters based on room temperature.
Details device specifications like type, item number, connection, dimensions, and protection class.
Default temperature settings for Day, Eco, Night, Frost modes and clock program.
Check for damage and correctness of type/model after unpacking.
Guidelines for placing the thermostat in the room for optimal performance.
Specifies protected bus cable types and considerations for connecting the thermostat.
Steps for physically mounting and connecting the thermostat to air heaters.
Guide for initial power-up, language selection, and setting date/time.
Describes the function of each physical button on the OptiTherm device.
Details the meaning of icons and information shown on the device display.
Explains the frost protection function that automatically activates heaters below a set temperature.
How to turn heating and ventilation modes on or off using dedicated buttons.
Instructions for activating the overtime timer to extend operation modes.
How to access user settings via PIN code.
Adjusting temperature settings for Day, Eco, and Night modes.
Programming the daily heating schedule with programmable time blocks.
Adjusting temperature readings for accuracy against actual room temperature.
Resetting the device to its default configuration and original values.
Understanding general messages on the display, indicating blocked heaters or connection issues.
Understanding error codes, malfunction indicators, and red LED status for air heaters.
To Next Page
