OFF
ON
3X
Turn the ignition switch from the
OFF position to the ON position 3
times leaving it in the Off position
the third time.
Step 1
Press and hold the ( )
buttons at the same time for 5
seconds, there will be 6 short
confirmation chirps and 3 long
chirps/beeps to confirm the system
“Alarm Feature Programming Group
1, 2 and 3” will return to factory
default settings.
Step 3
+
Before 15 seconds has passed,
push and release the valet switch 12
times. Hold the button down on the
12th press until 6 short chirp/beeps
and 1 long chirp/beep is heard then
release it.
11X + 1X(Hold)
Step 2
19
Return to Default Settings
X4-IM.qxp 3/6/08 10:53 AM Page 19
To Next Page
