Marksman X4 - Alarm Feature Programming

Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will
confirm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the
programming mode.
Step 3
One Chirp
Two Chirps Three Chirps Four Chirps
Button One LED Pulse
Two LED Pulses Three LED Pulses Four LED Pulses
(Default Setting)
Remote Feature Programming
Press the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button
that relates to the feature you want to adjust until the correct amount of chirp/beeps is heard then move on to the
next feature.
All Chirps On
- OEM type chirp mode -
Silent arm. Arming
confirmation chirp w/
second button press
Tamper indicator chirps on
All Chirps Off
Arm/ Disarm Chirps Off
Tamper Indicator chirps on
Automatic Arming without
Automatic Door Locking
Automatic Arming with
Automatic Door Locking
Manual Arming
Automatic Rearm Off
Automatic Rearm On
Instant Door Ajar
Error Chirp
45 Second Delay
Door Ajar Warning
Door Ajar Warning Off
+
Normal function
Horn Output
Horn Output for alarm
trigger, panic and
car-finder only
+
Normal Horn Output
pulse duration
PVID 1 Horn Output
S-S-S - L-L-L - S-S-S
PVID 2 Horn Output
S-L-S-L
PVID 3 Horn Output
S-S-S-L
PVID 4 Horn Output
S-M-L-S-M-L
PVID 5 Horn Output
S-S - L - S-S
Five Chirps
Five LED Pulses
Six Chirps
Six LED Pulses
Note: Horn output settings are valid for the
Light Brown wire only.
Car Jacking Alarm Off
Manual
Car Jacking Alarm On
+
Step 4: Exit Program Mode
15
Alarm Feature Programming (Group 1) (continued)
Automatic
Car Jacking Alarm On
X4-IM.qxp 3/6/08 10:53 AM Page 15