marposs P5 User Manual

12 3.
Use P5 – Operator Guide
3.1.4. F keys
The to keys on the front panel can be used either as Function keys or Hot
keys.
Note: Function keys have an F number in the upper left corner of the icon.
Function keys
Function keys are only available on a specified page. They are predefined to do a
specific task on that page and cannot be changed by the operator.
Note: Function keys are available only after the page is selected.
To select the page, press
Enter
.
Hot keys
These are shortcuts to any page of the program and are defined by the operator via
keypad. This allows customization of the gauge system to specific needs or
preferences. Six Hot keys are available in Automatic mode and another six in Manual
mode. For instructions on how to define these keys, see section 3.1.5 on page 13.
Hot keys are available at the folder, sub-folder or page level as shown below. Press
to view the Hot keys currently defined. These are examples of typical hot keys
definitions.
Function
keys
Function key Hot key
F number

marposs P5 Specifications

General

Brand	marposs
Model	P5
Category	Controller
Language	English