Optical configuration 23
5 Replace the bottom cover and unlock the head before operating.
Gobo animation
The gobo animation system is designed to create animated effects such as flames, sky and water imaging. The MAC
2000 Performance comes with 5 replaceable gobo animation wheels, which are magnetically attached to a motor shaft,
and which can be quickly changed. The gobo animation wheel pivots to allow horizontal, vertical and angled effects,
such as rising flames or windswept clouds.
The following gobo animation wheel patterns are available:
• Radial breakup (DHA 16 - installed)
• Cloud breakup (DHA 11)
• Dot breakup (DHA 18)
• Tangential breakup (DHA 12)
• Spiral breakup (DHA 13)
To replace the gobo animation wheel
1 Disconnect the fixture from power and allow it to cool.
2 Lock the head in the upside down position and remove the bottom cover.
Locking plate
Position the effect holder
groove over the fixed plate.
Figure 15: Replacing effects
DHA 18DHA 13DHA 12DHA 11
DHA 16 - installed
To Next Page
Loading...
