© Martin Engineering GmbH 37 M3682UK-09/17
Maintenance
10. Observe the cleaner and check its cleaning performance.
6.3 Replacing the blades
WARNING RISK OF INJURY!
Body parts and/or clothing may get caught and pulled in by
rotating parts or by the moving conveyor belt.
Do not touch or reach into the conveyor system or its accessories
during operation.
CAUTION RISK OF DAMAGE!
Never operate the belt cleaner for longer than 15 minutes on the
running unloaded conveyor belt. A risk of damage due to
overheating exists for the belt cleaner and/or the conveyor belt.
Never operate the belt cleaner unless the conveyor belt is running.
WARNING RISK OF INJURY!
Body parts and/or clothing may get caught and pulled in by
rotating parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out ensure
that all power sources to the conveyor belt system and its
accessories are switched off and secured against unauthorised
reactivation. Use warning signs!
To Next Page
Loading...