Martin SQC2 - Replacing the Blade Cartridge

© Martin Engineering GmbH 38 M3682UK-09/17
Maintenance
6.3.1 Replacing the blade cartridge
1. Remove the wire lock pin (7, Fig.25) from the threaded rod
(4, Fig.25) of the tensioner.
2. Slacken the tensioner by turning the lower hexagon of the
threaded rod anticlockwise
3. Repeat steps 1 and 2 on the far side.
Fig. 28:
NOTE
The following points apply only for the cleaner with part number
41641.
7
4