MARUTI SUZUKI CELERIO - Folding Rear Seats; Rear Seats; To Fold the Rear Seats Forward

2-13
BEFORE DRIVING
76MH1-74E
Seat position adjustment lever (1)
Pull the lever up and slide the seat.
Seatback angle adjustment lever (2)
Pull the lever up and move the seatback.
Seat height adjustment lever (3)
(if equipped)
Pull the lever up to raise the seat. Push the
lever down to lower the seat.
After adjustment, try to move the seat and
seatback forward and rearward to ensure
that it is securely latched.
Rear Seats
Folding Rear Seats
The rear seat(s) of your vehicle can be
folded forward to provide additional cargo
space.
To fold the rear seats forward:
76MH0A028
1) Insert the latch plate of the outboard
lap-shoulder belts into the slit (1).
76MH0A029
2) Pull up the release straps on the top of
the seat(s), and fold the seatback for-
ward.
NOTICE
• When you move a seatback, make
sure the latch plate is inserted into
the slit securely so the seat belts
are not caught by the seatback,
seat hinge, or seat latch. This helps
prevent damage to the belt system.
• Make sure the belt webbing is not
twisted.
(1)
EXAMPLE
NOTICE
After folding the rear seatback for-
ward, do not allow any foreign mate-
rial to enter the lock opening. This
may cause damage to the inside of
the lock and prevent the seatback
from being locked securely.
WARNING
If you need to carry cargo in the pas-
senger compartment with the rear
seat back folded forward, be sure to
secure the cargo or it may be thrown
about, causing injury. Never pile
cargo higher than the seatback.
EXAMPLE