Masimo SET Radical-7 - Radical-7 Monochrome Model Parts List

Radical-7 Signal Extraction Pulse CO-Oximeter Service Manual
16-1
16 Radical-7 Monochrome Parts List
1. Latch
10. Display Retainer 19. NiMH Battery Pack
2. Top Shell
11. MX-x Standoff Mounting Hardware (4 pcs) 20. Radical-7 Logo Label
3. Swivel Connector
12. Handheld System Board 21. Lithium Coin Cell
4. Leash Pins
13. Portable System Board Mounting Hardware (2 pcs)85
22. Foam Pad
5. Speaker Gasket
14. Standoff (4 pcs)
6. Speaker
15. MX-xx mounting Hardware (4 pcs)
7. Keypad Adhesive
16. MX-1, MX-3
8. Keypad
17. Back Shell
9. Display.
18. Plastics Hardware (6 pcs)
Portable Board – MX-x board compatibility Table (lower case x indicates compatibility):
Portable System Board MX-1
2
20755 20699
Radical 7 Portable System Board Re-order Part Number 20841
MX-1 Board Re-order Part Number 2143
WARNING: Disassembly or repair by authorized Service Personnel only.
2
The Oximeter Board re-order part number is different than the part number label on the board. The re-order part number indicates that the board has been tested and programmed. The
portable Systems Board and the MX-x Circuit Board must be compatible. Re-order the part number as indicated in the table above.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
19.
18.
20
21.
22.