Safety Information, Warnings, and Cautions
The manual including all precautionary information, and specifications should be read before use.
Always use the iSpO2 precisely in accordance with the directions in this manual, including finger selection and
finger alignment in the sensor. See Best Practices for Accurate Readings on page 13. Failure to follow all of the
directions in this manual could lead to inaccurate measurements.
WARNING: To avoid the risk of electrical shock, when using the iSpO2 do not plug anything else into any port of the
Android-powered device, including a headphone jack or docking port.
WARNING: To avoid the risk of electrical shock, do not use the iSpO2 when the Android-powered device is plugged
into an AC power outlet.
WARNING: Carefully route cabling to reduce the possibility of your entanglement or strangulation.
WARNING: Do not adjust, repair, open, disassemble, or modify this unit. Injury or equipment damage could occur.
Return unit for servicing.
WARNING: Inaccurate SpO2 readings may be caused by:
• Intravascular dyes such as indocyanine green or methylene blue
• Externally applied coloring and texture such as nail polish, acrylic nails, glitter, etc.
• Elevated levels of bilirubin
• Severe anemia
• Low arterial perfusion
• motion artifact
CAUTION: Do not use a sensor or cable with exposed optical or electrical components.
CAUTION: Do not use damaged sensors or cables.
www.masimo.com 3 Masimo
To Next Page
Loading...
