How to fix Masimo Medical Equipment Root when it does not turn on?
If your Masimo Medical Equipment Root does not turn on, ensure you press the power button for two seconds. Also, the battery may be depleted, so connect Root to AC power to charge the battery. If the issue persists, one of the fuses might not be operating properly and need replacement.
Why is my Masimo Root Medical Equipment battery not charging?
If the battery on your Masimo Medical Equipment does not charge, the AC power cable may be disconnected. Unplug and replug the AC power cable to ensure a proper connection.
Why won't my Masimo Medical Equipment Root turn on?
Your Masimo Root device may not be turning on because the power button wasn't pressed long enough. Try pressing and holding the power button for two seconds. Also, the battery might be depleted; connect the Root to AC power to charge it. Finally, one of the fuses might not be working correctly; in this case, replace the fuse.
What to do if Masimo Medical Equipment Root turns on but the main screen is dim?
If your Masimo Medical Equipment Root turns on but the main screen is dim or blank, the brightness setting may be incorrect. Adjust the brightness setting to resolve this issue.
Why is my Masimo Root Medical Equipment not displaying data from modules?
If your Masimo Medical Equipment is not displaying data from Radical-7, Radius-7, or MOC-9 modules, a connection error may be the cause. Ensure that all connections are securely in place and properly plugged in, and verify that the cable is not defective. If using Radius-7, ensure that the device is paired with Root via Bluetooth.
What to do if Masimo Medical Equipment Root has a continuous speaker tone?
If your Masimo Medical Equipment Root has a continuous speaker tone, press the Power Button for eight seconds to silence the alarm. If the alarm continues to sound, power off Root.
Why doesn't Iris screen display connection status on my Masimo Medical Equipment?
If the Iris screen on your Masimo Medical Equipment does not display the connection status for standalone devices, it could be due to a connection error. Try unplugging and replugging the Iris Adapter.
Why doesn't the EMR Push icon appear on my Masimo Root?
If the EMR Push icon does not appear in the Action Bar of your Masimo Medical Equipment, ensure Wi-Fi is enabled and that Root is connected to Patient SafetyNet.
Why does Nurse Call not communicate on my Masimo Root?
If the Nurse Call feature on your Masimo Medical Equipment is not communicating, unplug and replug the Nurse Call connector.
Why is my Masimo Medical Equipment Root not displaying data from Radical-7, Radius-7, or MOC-9 modules?
If your Masimo Root isn't displaying data from modules, there may be a connection error. Ensure all connections are secure and properly plugged in, and that the cable is not defective. For Radius-7, make sure the device is paired with Root via Bluetooth.
General| Category | Medical Equipment |
|---|---|
| Display | 10.1 inch touchscreen |
| Connectivity | WiFi, Bluetooth |
| Power Supply | AC power |
| Dimensions | 26.8 cm x 22.4 cm x 5.1 cm |
| Ports | USB, Ethernet |
| Supported Parameters | SpO2, Pulse Rate |
| Compatibility | Masimo sensors |
| Model | Root |
To Next Page
