Massimo 800ATV - Checking the Engine Oil Level

To Next Page

To Previous Page

intervals specified in the periodic

maintenance and lubrication chart.

Checking the engine oil level

1. Place the ATV on a level surface.

2. Start the engine to warm it up for several

minutes, and then turn it off.

3. Wait a few minutes until the oil settles.

4. Remove the engine oil filler cap and wipe

off the dipstick with a clean rag.

5. Insert the

dipstick into the mounting hole

(no need to spin), then take the scale out to

check the oil level.

1. Engine oil filler cap 2. Dipstick

NOTE:

The engine oil should be between the

minimum and maximum level marks.

1. Maximum level mark 2. Minimum level mark

8-9

MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO

Related product manuals