Massimo 800ATV - Auxiliary DC Jack

To Next Page

To Previous Page

Adjust the spring as follows:

To increase the spring preload, tom the

adjusting ring in direction (a).

To decrease the spring preload, lure the

adjusting ring in direction (b).

1. Spring preload adjusting ring 2. Position indicator

NOTE:

A special wrench can be obtained at a dealer

to make adjustment.

B- Standard position

A- Minimum (soft)

E- Maximum (hard)

1. Special wrench

Auxiliary DC jack

The auxiliary DC jack is located at the front

righter side of the ATV.

The auxiliary DC jack can be used for suitable

work lights, radios, etc.

The auxiliary DC jack can provide 8.5A/12V

4-21

MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO

Related product manuals