Massimo 800ATV - Clock Mode; Fault Code Indicator

To Next Page

To Previous Page

“TRIP/ODO” button, and then press the

“TRIP/ODO” button for at least three seconds.

The trip meter can be used to estimate the

distance that can be traveled with a full tank of

fuel. This information will enable you to judge

the fuel consumption.

Clock mode

Press the “

”/“ ” button switches a little long

time, and then you could set the clock.

1. Press the trip/odo button to set the hour

2. press “

”/“ ”fist, then press the trip/odd

button to set the minute

3. press “

”/“ ”to save the your settings

and then quit.

If no press on the button within 12 seconds,

the setting becomes invalid.

Fault code indicator

When the EFI encounters faults, ECU will

send the fault code to the speedometer, which

will flash on the clock.

If there are more than one fault codes, they

will be shown in rolling turn. Press the clock

button, the time would be shown. And after

five seconds, the fault code returns again.

Only after the fault is removed, time would

show automatically.

The meaning of the fault code is shown in

Chapter 11 in this manual.

4-6

MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO

Related product manuals