NOTE:
When the gear shift is in Neutral (N), check
the “N” light on meter is lighted or not. If not,
please check the circuit of ATV.
4. Turn the main switch to “ON” and the
engine stop switch to “ ”.
5. Press the “Start” button, then the engine
will be turned on.
See the “Engine break-in” section prior to
operating the engine for the first time.
Starting a warm engine
To start a warm engine, refer to the
“Starting a cold engine” section. The
starter (choke) should not be used. The
throttle should be opened slightly.
Warming up
To get maximum engine life, always warm
up the engine before starting off.
Never accelerate hard with a cold engine!
To see whether the engine is warm or not,
with one third throttle to have a 3km driving,
or let the engine driving 3minutes with
2000rpm..
Engine’s turning off
Turn the left handlebar switch “
/ ” to “ ”,
then the engine will be turned off.
Or turn the key to “OFF”, which can turn off
the engine as well.
Recommended procedure of turning off
the engine
1. Stop the ATV;
2. Turn off the left handlebar switch to
stop the engine;
6-2
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO
MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO