Massimo 800ATV - Page 111

To Next Page

To Previous Page

If there is no need to replace the oil filler, skip

step 4-6.

8-11

5. Apply a light coat of engine oil to the

O-ring of the new oil filter.

Make sure to select the proper O-ring.

1. O-ring

6. Install the new oil filter with an oil filter

wrench, and then tighten it to the specified

torque with a torque wrench.

. Engine oil filter 2.Torque Bolt

Tightening torque:

Oil filter cartridge:

17 Nm(1.7m·kgf,12.38ft·lbf)

7. Install the drain bolt and tighten it to the

specified torque.

Tightening torque:

oil drain bolt:

30 Nm (3.0m·kgf, 21.85ft·lbf)

MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO MASSIMO

Related product manuals