3. Using autorange switch circuit and modulus transducer which has 8000
count and high resolution, the instrument has high accuracy and easy
operation.
4. Minimum current of Active Energy measurement is 0.5A, it can
measure expending energy per hour of general electrical equipment.
Measurement and display five parameters of power: Active Power,
Apparent Power, Power Factor, Reactive Power, Active Energy.
5. Double display two parameters on each menu and store 28 groups of
measurement parameter.
6. Measure five power parameters of each phase and total power value in
three-phase measurement mode respectively.
7. Multifunctional button control, there are double scales analogue bar
graph to display fluctuation of voltage and current.
8. With PC RS232C interface and special WINDOWS data graphics
software.
9. Display measurement time and select tested voltage signal be power
supply for the clamp at one time in Active Energy measurement mode,
so the instrument can measure for long .
10. The instrument is a portable clamp meter. It is very light and
convenient to carrying .
- 3 -
To Next Page
Loading...
Need help?
General
