An Alarm popup is displayed when a connected
device generates an alarm. Tap ‘Log’ to
navigate directly to the device page or ‘Snooze’
to snooze the alarm. If the alarm persists, the
popup is shown every 9 minutes.
The buzzer can also be target in the MasterBus
events. See also section 6.7.
This means the buzzer can sound even if you
switched it off in the configuration.
In case an alarm is present in the system, the
Alarm button will be shown in the upper left
corner of the Dashboard.
Tap the Alarm button from the Dashboard to
open the list with active alerts from all
connected devices.
To Next Page
Loading...
