Mastervolt EasyView 5 User Manual

EasyView 5 - User’s and Installation Manual
27
8 Additional information
8.1 MasterAdjust software
For system configuration settings, you need the MasterAdjust or System Panel software. To use
MasterAdjust, you need a MasterBus-USB interface for communication between your PC and the
MasterBus. See ordering information. See the user manual of the MasterBus-USB interface for
detailed information.
Mastervolt MasterAdjust software is available as free to download software on the Mastervolt
website (www.mastervolt.com). Features:
 System configuration: to adjust the
entire MasterBus network and all
connected devices in accordance
with your personal preferences,
including programming of Event-
based commands (see section 6.7);
 System Monitor: complete actual
overview of your entire electrical
installation;
 System logger: data logging
instrument to retrieve historical data
of your electrical installation.
8.2 Ordering information
Part number
Description
77040000
MasterBus terminating device*
77040020
MasterBus cable, 0,2m
77040050
MasterBus cable, 0,5m
77040100
MasterBus cable, 1,0m
77040300
MasterBus cable, 3,0m
77040600
MasterBus cable, 6,0m*
77041000
MasterBus cable, 10m
77041500
MasterBus cable, 15m
77042500
MasterBus cable, 25m
77050100
100m / 330ft MasterBus cable (UTP cable)
77050200
50 pcs. modular jacks
77050000
Complete set to assemble MasterBus cables. Delivery includes: 100 meter UTP cable, 50
pcs. modular jacks and crimping tool
77030100
MasterBus-USB interface, required as interface between your PC and the MasterBus
when using MasterAdjust software.
* These parts are standard included with the delivery of the EasyView 5
Masterbus – USB interface
Standard USB cable

Mastervolt EasyView 5 Specifications

General

Brand	Mastervolt
Model	EasyView 5
Category	Control Panel
Language	English