7 Options
7.1 Chip Encoding (Contact and Contactless)
The Chip Encoder is an optional module for the MC320 Series that allows the encoding of chip cards
(smart cards).
Available chip encoding modules and related functionalities:
•
Dual Interface Encoder Module (Contact and Contactless cards) Code PR10300003
Allows you to run chip encoding on contact and contactless cards
Install the module according to the instructions contained in the package.
7.2 7.2 Use of PC/SC encoder wizard to test Dual interface in MC320
To perform the Dual interface working check, select ‘Perform PC/Sc encoder check’ from the Tool menu & click OK.
Note: The test can only be performed with MC320 printer installed with Dual interface module PR10300003.
Follow the instruction provided in wizard & click next to continue the test.
To Next Page
Loading...
