14 PROTON 206/308 V1 System Manual
Relevant Topics:
1. “Class Of Service (COS)” 36
2. “Trunk Parameters” 78
3. “Trunk Access” 75
4. “Toll Control” 73
Alarm
What’s this?
• The PROTON 206/308 can remind a station user after some specific time.
• On expiry of the set time, the telephone starts ringing
• When the station user lifts the handset, he gets music.
• If he does not answer the call for time = Alarm Ring Timer 1 then the system gives ring to both, the station
user and the operator for time = Alarm Ring Timer 2.
• Only one reminder can be set at a time on one station. The last set alarm supersedes all the previous
timings.
• All station users can set duration alarm for same duration simultaneously.
• If the station is engaged at the time of alarm then the station gets alarm when it becomes free.
• Ring cadence of an alarm is same as that of Boss Ring.
How to use it?
Minutes can be from 00 to 99.
Example:
To set a reminder after 9 minutes, dial 161-09.
To Cancel Alarm:
Example:
To cancel the alarm dial 160 from your station.
How to program?
Refer “Class Of Service (COS)” for details on how to allow Alarm to a user.
Timers of Relevance:
Alarm Ring Timer 1-Time for which the station rings on which the alarm is set.
Command : 217-13-Timer
Default : 90 seconds
Valid Range : 01 to 99 seconds.
Alarm Ring Timer 2-Time for which the station on which the alarm is set and the operator station both, rings
simultaneously.
Command : 217-14-Timer
Default : 60 seconds
Valid Range : 01 to 99 seconds
1 Lift the handset. Dial tone
2Dial 161-Minutes. Confirmation tone
3 Replace the handset.
1 Lift the handset. Dial tone
2 Dial 160. Confirmation tone
3 Replace the handset.
To Next Page
Loading...
