32 PROTON 206/308 V1 System Manual
Programming Confirmation Tone
This is exactly same as the feature confirmation tone. This tone is continuous, fast beeps. During programming,
this tone indicates that valid command is received by the system and it has taken necessary action. This tone
remains for 3 seconds. This is called Programming Confirmation Tone Timer and is programmable.
• Sound: Beep... Beep... Beep
Use following command to program the Programming Confirmation Tone Timer:
217-07-Seconds
Range = 01 to 99 seconds
Default = 02 seconds
Tone Specifications:
Call Splitting
What’s this?
• This feature enables you to talk to two persons alternately.
• Call Splitting is also known as Hold-Consult or Hold-Toggle.
How to use it?
Call Splitting can be used in any of the following three combinations:
1. Two stations
2. One station and one trunk
3. Two trunks
Call Splitting between two stations
Call Splitting between two trunks
Name Frequency Cadence
Dial Tone 440Hz Continuous
Ring Back Tone 440Hz 400ms on, 200ms off, 400ms on, 2000ms off
Busy Tone 440Hz 750ms on, 750ms off
Error Tone 440Hz 250ms on, 250ms off
Internal Call Waiting Tone 440Hz 67ms on, 2933ms off
Trunk Call Waiting Tone 440Hz 67ms on, 67ms off, 67ms on, 2799ms off
Feature Confirmation Tone 440Hz 33ms on, 33ms off
Programming Tone/Feature Tone 440Hz 100ms on, 900ms off
Programming Confirmation Tone 440Hz 33ms on, 33ms off
Programming Error Tone 440Hz 250ms on, 250ms off
1 Speech with station.
2Dial Flash. Feature tone. Called station goes on Hold.
3 Dial another Station. Ring Back Tone
4 Speech with the station when the call is answered.
5Dial Flash-1. Speech with held party.
1 Speech with trunk.
2Dial Flash. Dial tone. Trunk goes on Hold.
3Dial 8. Feature tone
4Dial 0 or 5 or 61-63 to grab another trunk. Trunk dial tone
5 Dial telephone number. Ring Back Tone
To Next Page
Loading...
