88 PROTON 206/308 V1 System Manual
B: System Commands
C: System Parameters
22 Hot Line 153-Station
Hot Line Delay 154-Seconds
Hot Outward Dialing 151-Trunk
Hot Outward Dialing-With Number 152-Trunk-Number-#
Hot Outward Dialing Delay 154-Seconds
Cancel Hot Line And HOD 150
23 Interrupt Request Station-3
24 Last Number Redial 7
25 Use Memory Dialing 8-Directory Index
26 Program Personal Memory 18-Directory Index-Trunk- Number-#
28 Raid Station-4
29 Selective Trunk Access 6-Trunk Number
30 Trunk Reservation 112-Trunk
Cancel Trunk Reservation 112-0
31 Walk-In Class Of Service 111-Station-User Password
32 Enter SA mode 19-SA Password
33 Enter SE mode 19-SE Password
34 Exit SE/SA Mode 0 on Programming Tone
01 Enter SE/SA Mode 19-SE Password
02 Set Day Mode (Manual Operation) 151
03 Set Night Mode (Manual Operation) 152
04 Single Ring On Trunk Call Transfer 157-0
05 Double Ring On Trunk Call Transfer 157-1
06 Demonstrate Dial Tone 161-1
07 Demonstrate Ring-Back Tone 161-2
08 Demonstrate Busy Tone 161-3
09 Demonstrate Error Tone 161-4
10 Demonstrate Confirmation Tone 161-5
11 Demonstrate Programming Tone 161-6
12 Demonstrate Warning Tone 161-9
13 Demonstrate Music 161-0
14 Loading Factory Setup 18-SE Password
15 Restart System 10
16 Abbreviated Dialing 8-Directory Index-Trunk- Number-#
17 Exit SE/SA Mode 0
1 Feature Group 250-COS Group-Feature Index-Code
2 Pilot Group 251-Dept. Group-Station1…..Station8
3 Allowed List 252-Level-Location-Number-Flash
4 Denied List 253-Level-Location-Number-Flash
5 Set New Program Password 291-New SE Password
6 Set New Admin Password 292-New SA Password
7 DOSA Inactivity Timer in Seconds/Minutes 207-0/1
To Next Page
Loading...
