56 PROTON 206/308 V1 System Manual
Switching on the system
• Now switch on the system. The system will take about 3-4 secs.to reset. The reset cycle can be seen on the
front panel of the system.
• Normal condition of the system:
• Green LED marked ‘Power’ always remains ON.
• You get dial tone on the station.
Testing the basic performance
• You can check functioning of the PROTON 206/308 by testing all the stations and the trunk.
• Test all stations for dial tone, ring back tone, speech and ring one by one.
• Test functioning of the trunk by dialing outside number from one of the stations and checking the trunk tones
and speech. Ring on the trunk can be tested by asking your friend to dial your number.
PROTON 206/308 Mechanical Drawing
To Next Page
Loading...
