Matrix Vision mvHYPERION-Series

To Next Page

To Previous Page

9.1 wxPropView 51

Figure 2: wxPropView - First start

Now, you can capture an image ("Acquisition Mode": "SingleFrame") or display live images ("Continuous"). Just

• select an "Acquisition Mode" e.g. "SingleFrame" and

• click the "Acquire" button.

Note

The techniques behind the image acquisition can be found in the developers sections.

The frame rate depends on

• the camera,

• the pixel clock of the sensor

MATRIX VISION GmbH

Matrix Vision mvHYPERION-Series - Page 55