Matrix Vision mvHYPERION-Series - How to Update the Firmware

9.2 mvDeviceConfigure 97
9.2.1.3 Step 3: Assign the new ID
Enter the new ID and click OK.
Figure 55:mvDeviceConfigure - New ID
Now the overview shows you the list with all devices as well as the new ID. In case there has been an ID conflict
before that has been resolved now mvDeviceConfigure (p. 95) will no longer highlight the conflict now:
Figure 56:mvDeviceConfigure - Resolved ID conflict
9.2.2 How to update the firmware
With the mvDeviceConfigure tool it is also possible to update the firmware. In the device list, new firmware
versions, if available, will be marked in blue.
These steps are necessary:
MATRIX VISION GmbH