Matrix ETERNITY ME User Manual

6 Matrix ETERNITY Quick Start
Installing SLT, DKP and TWT Cards
• Unpack the SLT, TWT, DKP cards. Remove the filler brackets of the universal
slots and insert the cards.
• Plug the MDF cables provided with each card into the connectors of the cards.
• Terminate the free ends of the MDF cables from the card connectors into the
Krone modules of the Main Distribution Frame. Refer the cable connections
given in the “Appendix” for terminating the cables into the Main Distribution
Frame.
• Connect Single Line Analog Telephone instruments to the SLT ports over the
MDF.
• Connect Digital Key phones, EON42, EON48 and their consoles DSS72 and
DSS16X4 to the DKP Ports over the MDF.
• Connect Two Wire Trunk (Analog Trunk) lines to the TWT ports over the MDF.

Matrix ETERNITY ME Specifications

General

Brand	Matrix
Model	ETERNITY ME
Category	PBX
Language	English