Matrix ETERNITY ME

80 Matrix ETERNITY Quick Start
• Two different station numbers cannot be assigned the same Mailbox number.
• For changing the Mailbox related parameters, refer topic “Configuring the
Mailbox Parameters”.
Abbreviated Name:
• By default, the ‘Abbreviated Name’ field is blank for all station numbers.
• Assign abbreviated name, if Dial by Name feature is to be used Only 3
alphabets of the station user’s name can be programmed as Abbreviated
name, and it should be enter in capital letters. For example: enter ‘RAK’ as the
abbreviated name for Rakesh.
Mode:
• ‘Mode’ is the transfer type to be used for the station.
• The two different Modes supported are: Manual and Scheduled.
• Select ‘Manual’ mode for Station if the Transfer type is to be kept fixed through
out the day.
• Select ‘Scheduled’ mode for Station if the Transfer type is to be kept different at
different times of the day.
• By default, ‘Manual’ mode is selected.
If Manual Mode is programmed:
• Program the Transfer type in the field “Manual Mode Transfer Type” for the
station.
• By default, “Wait for Answer” is selected as the Manual Mode Transfer Type.
• To know more about different transfer types refer “Transfer Types” in the
ETERNITY VMS System Manual.
If Scheduled Mode is programmed:
• Program Start Time and Transfer Type for Time Zone 1 - Time Zone 4 in
Scheduled Mode.
Start Time for Time Zone 1-Time Zone 4:
• By default, Start Time = 00.00.
• Start time of Time Zone 2 is the End time of Time Zone 1 and so on. Thus,
program the Start time accordingly.