Matrix ETERNITY Quick Start 15
Installing Mobile Card
• Unpack the Mobile Card.
• Connect the antenna (provided with the Mobile card) to the connector on the
Mobile card.
• You may enable PIN Protection on your SIM card before inserting it into the
Mobile port.
• If you want to use PIN Protection,
• First, insert the SIM card in a Mobile handset.
• From the Mobile handset change the PIN to 1234.
• Remove the SIM from the Mobile handset and insert in the Mobile Port of the
ETERNITY.
• Installing the SIM with PIN value 1234, allows you to change the SIM PIN
from the ETERNITY later.
• If you don't want to use PIN Protection,
• Insert the SIM in the Mobile handset and disable PIN Protection.
• Remove the SIM Card from the Mobile handset.
• Insert the SIM Card (PIN changed to 1234), with its contact side facing down
into the SIM Holder on the Mobile card.
Failure to follow the instructions on PIN protection may cause your SIM Card to be blocked and you
will require Personal Unblocking Number (PUK) to reactivate it again.
• To insert the SIM cards into the SIM holders, refer the illustrations of the Mobile
cards.
To Next Page
Loading...
Need help?
General
