Matrix ETERNITY Quick Start 25
• If you want to use the DHCP Server on your LAN for assigning IP Address to
the Extended IP Phone, do the following:
• use DHCP option 224 and Data Type as ‘String’ to provide Server Address
to the Extended IP Phones.
• Program the IP Address or the Dynamic DNS Domain Name of the Master
Ethernet Port of ETERNITY in the DHCP option.
• Log in to Jeeves. For instructions, read the topic “How to access Jeeves”.
• Assign an extension number (SIP ID or Access Code) to the Extended IP
Phone. For instructions on assigning SIP ID, see the topic Configuring SIP
Extensions, in the System Manual.
• For the SIP extension number you assigned to the Extended IP Phone, go to the
Location settings of the extension, and do the following:
• Enable Matrix Extended IP Phone Mode.
• Enter the MAC Address of the Extended IP Phone.
• Assign the Registrar Server IP Address, as per you installation scenario.
For instructions, see the topic Matrix Extended IP Phone Settings under
Configuring SIP Extensions in the System Manual.
Now, follow the steps described below to install the Extended IP Phone. The
instructions are common for all models of the SETU VP248. For the purpose of
illustration, the premium model, SETU VP248P, has been used.
• Unpack the SETU VP248 box and verify package contents.
• Mount the phone on a desk or wall at a location convenient to you.
• When mounting the phone on the wall, detach the Foot Stand from the
bottom of the phone.
To Next Page
Loading...
Need help?
General
