46 Matrix ETERNITY Quick Start
• If you want to use FTP to upgrade Software of the VMS Card, upload recorded
voice messages, store Back-up of Configuration files and Mailbox messages,
connect the Ethernet port of the VMS card to a standalone PC or a PC on LAN.
• Plug in one end of the Ethernet cable supplied with the card into
the Ethernet Port of the VMS Card.
•
Plug the other end of the cable into the Ethernet port of a standalone
PC or into a LAN Switch.
When you connect the VMS Card to a to a LAN PC, you need to make sure that
• The IP Address of the Ethernet Port of the VMS Card and the Ethernet Port of the LAN PC are
not the same.
• The Ethernet Port of the VMS Card and the Ethernet Port of the PC are in the same Subnet.
To Next Page
Loading...
Need help?
General
