Safety
44
KUNDENDIENST
DE
+49 (0) 1806/841090
service@matrix-direct.net
6. Do not overload the power tool.
• It works better and more safely within the specied power range.
7. Use the right power tool.
• Do not use any low-power machines to perform heavy-duty work.
• Do not use the power tool for purposes other than the intended one. Do
not use e.g. a handheld circular saw to cut tree branches or wood blocks.
8. Dress properly.
• Do not wear any loose-tting clothing or jewellery as it could be caught
by moving parts.
• It is recommended that you wear rm footwear when working outdoors.
• If you have long hair, wear a hair net.
9. Use protective equipment.
• Wear protective goggles.
• Use a breathing mask when performing dusty work.
10. Connect the dust extraction device.
• If there are any ports for dust extractors and collectors, make sure that
they are connected and used properly.
11. Do not use the cable for purposes other than the intended one.
• Do not use the cord to pull the plug out of the socket. Protect the cord
against heat, oil and sharp edges.
12. Secure the work piece.
• Use clamping xtures or a vice to hold the work piece. This will ensure
that it is more securely held than it would be with your hand.
13. Do not overreach.
• Keep proper footing and balance at all times.
14. Take good care of your power tools.
• Keep cutting tools sharp and clean so that you can work more eectively
and safely.
• Observe the notes for lubricating and changing tools.
• Check the connector cable of the power tool regularly and have it
replaced by a qualied professional in case of damage.
• Check the extension cords regularly and replace them if they are
damaged.
GB
To Next Page
Loading...
