First use
52
KUNDENDIENST
DE
+49 (0) 1806/841090
service@matrix-direct.net
Mounting the bench width extensions
19
32 18
1. Lift the saw by the side.
2. Insert the bench width extensions
19
as far as possible into the designated
positioning holes
18
.
3. Use two screws to fix each of the bench
width extensions in place.
4. Pull the bench width extensions to bring
them into the desired position and fix
them in place with the locking screw
32
.
Mounting the clamping device
40
41
42
1. Insert the clamping device
40
in the
holder for the clamping device
41
.
2. Use the locking screws
42
to fix the
clamping device in place.
GB
To Next Page
Loading...
