First use
53
KUNDENDIENST
service@matrix-direct.net
DE
+49 (0) 1806/841090
Mounting the dust collection bag
38
1. Press the retaining brackets of the dust
collection bag
43
together.
2. Push the dust collection bag onto the
chip suction nozzle
38
at the back
part of the saw.
3. Check whether the dust collection bag
is securely fitted.
4. Empty the dust collection bag once it is
half-full to ensure efficient operation.
Screwing the saw securely onto the base
34
To reduce the risk of severe injury, the saw
must be secured on the base using the four
mounting holes
34
.
− Place the saw on a level and stable work
surface.
The required screws are not included in
the pack contents.
4
The saw has a laser for guiding the cut. This enables precise,
simple cutting.
The laser is supplied with power by two type LR03 1.5 V
batteries (AAA).
GB
To Next Page
Loading...
