EasyManua.ls Logo

Matrix R1x - Fit Test Results

Matrix R1x
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
6.6 TROUBLESHOOTING  NOISE ISSUES
KNOCKING OR CREAKING NOISES
CHAPTER 6: TROUBLESHOOTING
POSSIBLE CAUSES:
1) The pedal is connected to the crank arm too loosely.
2) Belt tension is too loose, or the belt is dirty.
3) The crank is damaged.
4) The drive axle is damaged.
SOLUTION:
1) Clean and tighten the belts.
2) Tighten the connections between the pedal and crank arm.
3) Replace the crank.
4) Replace the drive axle.

Table of Contents

Other manuals for Matrix R1x

Related product manuals