65
8.6 LEVELING THE BIKE
CHAPTER 8: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
STABILIZING THE MATRIX R1X BIKE
After positioning the bike in its intended location, check its stability by attempting to shake it side to side. Shaking or wobbling indicates that your bike
needs to be leveled. Determine which leveler is not resting completely on the floor. Loosen the nut with one hand to allow the leveler to rotate. Rotate
the left or right leveler, and repeat the adjustment as necessary until the bike is stable. Lock the adjustment by tightening the nut against the rear foot
support.
To Next Page
Loading...
