57
8.4 ASSEMBLY INSTRUCTIONS
GETTING STARTED
Read the owner's manual before setting up the Matrix R1x Bike. Place the unit where it will be used before beginning the setup procedure.
MAKING A CHOICE OF SITE
The site should be well lit and well ventilated. Locate the Matrix R1x Bike on a structurally solid and flat surface. The bike should have a clearance of 20"
on one side and behind the unit, and 12" on the other side from the wall or other equipment. This zone is to allow easy access to the bike and gives the
user an easy exit path from the machine. If the site has a heavy plush carpet, to protect the carpeting and machinery, you should place a rigid plastic base
under the unit.
Please do not place the Matrix R1x Bike in an area of high humidity, such as the vicinity of a steam room, indoor pool, or sauna. Exposure to intensive
water vapor or chlorine could adversely affect the electronics, as well as other parts of the machine.
12"
20"
20"
CHAPTER 8: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
To Next Page
Loading...
