Matrix SPARSH VP210 User Manual

Matrix SPARSH VP210 User Guide 6
Bottom View
It is a PoE enabled phone and can be powered over Ethernet by connecting it to a PoE enabled LAN Switch (IEEE
802.3af Compliant). If you do not want to use PoE, plug in the connector of the Adapter into the power jack (DC Jack) at
the bottom of the phone. The IP phone should be used with Matrix original power adapter (5V/0.6A) only.
LCD Display
The LCD display of the phone is Dot Matrix Graphic LCD. The LCD backlight can be turned on and off as well as
adjusted for contrast and brightness from the “Customizing Your SPARSH VP210” of the Phone Menu.
Ringer LED
The Ringer LED will glow in Blue (1 sec ON – 500 msec OFF) to indicate incoming internal and external calls.
Feature Keys
There are 2 Feature Keys. Each Feature Key is accompanied by a feature icon that describes its function. Default
features assigned to these keys are as follows.
Feature icon
Assigned
Feature
LED Programmable
Headset No No
Mute No No

Matrix SPARSH VP210 Specifications

General

Brand	Matrix
Model	SPARSH VP210
Category	IP Phone
Language	English