7 Matrix SPARSH VP210 User Guide
Navigation/Notification Keys
There are 2 Navigation Keys, Up/Down Keys.
When the phone is in idle state these keys are used for accessing the Notifications - Call Back, Auto Redial, Trunk
Reservation, Contact Sync.
You can navigate sideways using the context keys, that is, Left Navigation < Key or Right Navigation > Key.
For more details, refer “Powering On”, “Network Settings” and “Call Logs”.
Dial Pad/Key Pad
The dial pad consists of 12 fixed keys for the digits 0, 1-9, and the characters Star (*), Hash (#), Lock ( ), Plus (+)
and Dot. The dial pad is used for dialing numbers of stations or external parties.
Speaker Key
The speaker key sets the phone in 'Speaker mode' for hands-free operation.
Volume Keys
• "+" (plus): This is the increase key, to raise the volume of speech while talking and to increase the Ringer
volume, when the phone is ringing.
• "-" (minus): This is the decrease key, to lower the volume of speech while talking and to decrease the
Ringer volume when the phone is ringing.
Headset Connectivity
The phone provides an RJ9 connector at the bottom of the phone body to connect a headset.
To use the Headset, a Headset Key is assigned on the phone. Make sure you have enabled the Use Headset
option, refer “Accessories”.
Phone Menu
You can access the following PBX and phone features from the Menu of the phone:
Menu option Description
Call Logs To view call history of internal and external Missed, Answered and Dialed calls.
Contacts To add, edit, delete names and numbers of contacts in the Global Directory Part 1.
Call Forward To set and cancel Call Forward - Unconditional, Call Forward - Busy, Call Forward - No
Reply, Call Forward - Busy/No Reply, Call Forward - Not Registered.
Dynamic Lock To change the Toll Control level of the phone.
User Status To set User Present or Absent.
Keypad Lock To lock the keypad of the phone.
To Next Page
Loading...
Need help?
General
